Archimedes' screw

From Wikipedia, the free encyclopedia
Jump to: navigation, search
Archimedes' screw
An Archimedes screw in Huseby south of Växjö Sweden
Archimedes' screw was operated by hand and could raise water efficiently

Archimedes' screw is a machine. It is a type of pump used for raising water up. It is a screw inside a fairly tight-fitting cylinder. With the bottom end in water, the screw lifts water up to the top, where it pours out of a spout. The screw can be turned by hand, or by a windmill, or by an engine. The screw is often used for filling irrigation ditches.

Archimedes wrote about it when he was in Alexandria, Egypt. It is not known for certain whether he did invent it, but it is always attributed to him.[1] The Archimedes screw is still much in use all over the world.

There is also a kind of reverse Archimedes' screw. Water poured in on top turns the screw. The turning drives an electric generator, which makes electricity. It is good for rivers with modest water drops ('low heads'). The reverse screw has the same benefits as using the screw for pumping: it can handle very dirty water and widely varying rates of flow, with high efficiency.

References[change | change source]

  1. Oleson, John Peter 1984. Greek and Roman mechanical water-lifting devices: the history of a technology. Dordrecht: D. Reidel. ISBN 90-277-1693-5