A Barcode reader or Barcode scanner is an electronic device which is able to scan and decode barcodes. These devices use optical technology such as infrared light. Some readers use an integrated decoder, others have one unit for reading the barcode, and another one to decode the barcode. A barcode reader, also called a price scanner or point-of-sale ( POS ) scanner, is a hand-held or stationary input device used to capture and read information contained in a bar code . A barcode reader consists of a scanner , a decoder (either built-in or external), and a cable used to connect the reader with a computer. Because a barcode reader merely captures and translates the barcode into numbers and/or letters, the data must be sent to a computer so that a software application can make sense of the data. Barcode scanners can be connected to a computer through a serial port , keyboard port , or an interface device called a wedge . A barcode reader works by directing a beam of light across the bar code and measuring the amount of light that is reflected back. (The dark bars on a barcode reflect less light than the white spaces between them.) The scanner converts the light energy into electrical energy, which is then converted into data by the decoder and forwarded to a computer.
There are five basic kinds of barcode readers -- pen wands, slot scanners, Charge-Couple Device ( CCD ) scanners, image scanners, and laser scanners. A pen wand is the simplest barcode reader. It contains no moving parts and is known for its durability and low cost. A pen wand can present a challenge to the user, however, because it has to remain in direct contact with the bar code, must be held at a certain angle, and has to be moved over the bar code at a certain speed. A slot scanner remains stationary and the item with the bar code on it is pulled by hand through the slot. Slot scanners are typically used to scan bar codes on identification cards. A CCD scanner has a better read-range than the pen wand and is often used in retail sales. Typically, a CCD scanner has a "gun" type interface and has to be held no more than one inch from the bar code. Each time the bar code is scanned, several readings are taken to reduce the possibility of errors. A disadvantage of the CCD scanner is that it cannot read a bar code that is wider than its input face. An image scanner, also called a camera reader, uses a small video camera to capture an image of the bar code and then uses sophisticated digital image processing techniques to decode the bar code. It can read a bar code from about 3 to 9 inches away and generally costs less than a laser scanner. A laser scanner, either hand-held or stationary, does not have to be close to the bar code in order to do its job. It uses a system of mirrors and lenses to allow the scanner to read the bar code regardless of orientation, and can easily read a bar code up to 24 inches away. To reduce the possibility of errors, a laser scanning may perform up to 500 scans per second. Specialized long-range laser scanners are capable of reading a bar code up to 30 feet away.