Derwent Valley Mills
|UNESCO World Heritage Site|
|Criteria||Cultural: ii, iv|
|Inscription||2001 (25th Session)|
|Buffer zone||4,362.7002 ha|
History[change | change source]
Industrial development in the area started with the Silk Mill which was built in Derby in 1721 by John and Thomas Lombe.
In 1771, Richard Arkwright built a water-powered spinning mill at Cromford. In 1776-1777, a larger mill was built nearby. The "factory system "evolved from these two cotton mills. Arkwright's inventions were first put into industrial-scale production.
The workers' housing was near the mills. The mills and houses make up an architectural record of the development of the area.
- Cromford's mills include Masson Mill, Upper Mill (1771) and Lower Mill (1776). There buildings with various original functions: warehouses, workshops, a loom shop, mill managers' houses, etc. The Cromford Canal was built in the 1790s as part of a route to Manchester.
- Belper's mills were Belper North Mill (1804) and East Mill (1912). Its houses are built from gritstone or locally made brick and roofed with Welsh slate.
- Milford's factory buildings have been taken down, but much of the housing survives. Many of the houses are in rows because of the hilly nature of the area. The public buildings established by the Strutts include schools, churches, and public houses.
- Darley Abbey had five water-powered mills - a paper mill, a corn mill, two flint mills (for porcelain production) and a leather mill.
The changes in the valley, including the creation of workers' housing, were important in the Industrial Revolution.
Related pages[change | change source]
References[change | change source]
Other websites[change | change source]
Media related to Derwent Valley Mills at Wikimedia Commons
- Derwent Valley Miils website Archived 2010-10-04 at the Wayback Machine at DerwentValleyMills.org
- Derwent Valley Mills at WorldHeritageSite.org