Field artillery in the American Civil War
Field artillery in the American Civil War were cannon that could be moved around the battlefield or could travel with an army unit. Field artillery could only fight unlimbered (disconnected from the cart and horses that pulled it). The limber (or caisson) along with the team of six horses would be moved to a safe area nearby.[a] Gun crews were organized into an artillery battery, six guns (later in the war, four) were deployed along a line about 82 yards (75 m) wide with the guns spaced about 15 yards (14 m) apart.
At times the horses remained hitched to the limber or caisson so the battery could move quickly. An artillery crew was made up of eight highly trained men. An artillery battery had a total of between 70 and 100 soldiers. There were several types of field artillery used during the Civil War. These included the 6 pounder gun, 12 and the 24 pound Howitzer, the famous Model 1857 12-Pounder Napoleon Field Gun,[b] the 3 inch Ordnance rifle and the 10 and 20 pound Parrott rifle.
They usually had barrels made of bronze and fired round iron cannonballs. The newer type was the rifled cannon that were made of cast iron and wrought iron. They fired Bullet-shaped shells. Both guns and ammunition had a tendency to be unreliable and they were dangerous to shoot.
Smoothbore cannon[change | change source]
Before the outbreak of the American Civil War, the United States government did not encourage any new developments in ordnance. Most ordnance experts in the U.S. Ordnance Department were older military officers who believed what worked during the Mexican–American War would work now and did not need improving. Inventors had to go through years of field experiments and political red tape just to get their ideas introduced. Most used their own money and could lose all their money trying to introduce a new idea.
Early cannons were identified by the term "pounder" (abbreviated "pdr"). This referred to the weight of the cannonball the gun fired. For example, a 12 pounder fired a round 12 pounds (5.4 kg) solid piece of steel. In the 17th century, when howitzers were developed, the term pounder began to be used less and less although it was used through the Civil War. Smooth bores included both guns and howitzers. Both had shorter barrels and used a higher trajectory. Both were less accurate than rifled cannons.
The Model 1857 12-pounder Napoleon with its green barrel made up 40% of the cannons on both sides. It was the most commonly used cannon. They were heavy at 2,600 pounds (1,200 kg) making them hard for the six-horse team to pull. The gun crew of the Napoleon was made up of six men. It could fire a ball, shell or canister shot out to a range of 1,400 yards (1,300 m) at a speed of 1,440 feet per second (or 439 meters per second). It used a charge of 2.5 pounds (1.1 kg) of black powder. The Union made 1,156 units while the Confederacy made 501. Because they did not have the manufacturing capacity of the North, Confederates attempted to capture as many Union-made Napoleon 12-pounders as they could. The Model 1857 was made to replace the Model 1841 6-pounder but both were used during the Civil War out of necessity.
For ranges of 400 yards (370 m) or less the most effective field piece was the Model 1842 12-pounder Howitzer. It weighed only 800 pounds (360 kg) and could easily be moved into position by hand. Its large shells gave it very good firepower but its short range (just over 1,000 yards (910 m)) was less than that of the 6-pounder gun. They were easy targets for enemy artillery that usually had greater range. They were popular for close infantry support. At the Battle of Gettysburg, nine of these were supposed to accompany Pickett's Charge. Because of some confusion among the Confederate ranks regarding the orders and very accurate Union artillery fire, all nine were taken out of the battle before Pickett's men crossed the field. The smoothbore guns remained the most favored technology during the war.
Rifled cannon[change | change source]
"The difference in accuracy, is the smoothbore gun can hit the barn at a mile's range, the rifled gun can hit the barn door".
While used mostly by the Union army, rifled guns were still a new idea and were not very popular among artillery officers or field commanders. Rifled guns were designated by the diameter of the bore of the barrel in inches. In 1860, the Ordnance Board recommended that half of the existing bronze smoothbore cannons be rifled. But this weakened the cannons to the point they could not stand the strain of firing. So the experiment quickly ended. Ordinarily the barrels of smoothbore cannons only lasted about 500 rounds before having to be replaced. Rifled barrels proved to last much longer in field use. The British-made Armstrong and Whitworth guns were good weapons but there were not enough of them to have any major effect on the war. A problem with the rifled guns was they fired too far for the gunners to accurately see to range their targets. When artillery observers and balloons were used for artillery spotting, this increased the accuracy of the rifled guns. Training artillery crews in the use of rifled guns took longer and was more difficult. General George McClellan was among the Union officers who felt that the American terrain was not well suited for the very long range of these weapons. Jefferson Davis, the Confederate President was of the same opinion. All these factors contributed to the slow acceptance of rifled cannon.
The cannon called the 3-inch Ordnance Rifle (also called the 3-inch Wrought Iron Rifle) was an early favorite of the Ordnance Board due to its accuracy. These and other rifled guns were distinguished by their black barrels. About 1,000 were bought during the war. They were made by the Phoenix Iron Works of Phoenixville, Pennsylvania. They were made of wrought iron strips bent on a mandrel then welded together. They were then machined into their final shape. The early prototypes were fired 500 times with no signs of wear. It was accurate and reliable in battle. The Confederacy also produced a 3-inch Ordnance Rifle. But the use of low-grade iron ore and poorer rifling machinery made these guns less reliable.
Another popular rifled type were the Parrott rifles. The original 10-pound model had a bore of 2.9 inches (74 mm). This was changed to 3 inches (76 mm) to standardize the round. They had cast iron barrels with a wrought iron reinforcement strip welded around the breech (rear of the cannon).[c]
Artillery rounds[change | change source]
There were basically four types of artillery rounds used in the Civil War:
- Solid Round Shot – This is a solid iron ball that could travel several miles. They were designed to crush the target.
- Explosive Shell – This was a hollow round iron ball filled with black powder. It had a fuse to make the iron ball explode when it reached the target. People today occasionally find these buried in fields and backyards. They can still explode with deadly results.
- Spherical case – It is also filled with gunpowder and uses a fuse. The hollow area is also filled with small iron balls. Used against troops it was usually timed to go off at chest-level. Case shot was designed to kill or injure enemy soldiers at maximum distance the cannon could fire.
- Canister Shot – Like spherical case it is a shrapnel round used against enemy troop formations. It contains usually between 20 and 30 large solid round balls. When fired it spreads out in a cone shape from the muzzle like a large shotgun blast. When canister balls were scarce, nails, scrap iron or other materials were used. Canister was a short range weapon usually effective at up to 250 yards (230 m). Some artillery commanders used a technique of firing canister at the ground in front of advancing troops. The effect was to bounce the canister shot into the formation and cause more deaths.
Gun crews[change | change source]
For the average artillery piece it took eight highly trained artillerymen to form a gun crew. Each member of the crew was cross-trained to do all the jobs required to operate a gun. If a crew member was killed or wounded, another member of the crew could take his place. Gun crews were among the best trained soldiers in either the Confederate or Union armies. They were also vulnerable. They had to see their target to hit it. If they could see their target, the enemy soldiers they were targeting could see them.
For a gun crew to get off the maximum number of accurate rounds per minute, they used a system whereby each man had a number. His number indicated his main task:
- Number 1 - Sponges out the barrel to wet down any hot spots or sparks. He then rams the round (cannonball and powder or shell) down the barrel.
- Number 2 - Uses a "worm" (a large corkscrew on a pole) to make sure there is nothing caught in the barrel. He then loads the round and charge in the barrel ready for ramming.
- Number 3 - Covers the vent hole with his thumb wearing a special glove. He then pierces the loaded powder bag with a spike.
- Number 4 - Places the friction primer in the vent hole just prepared by Number 3. On the command of "fire" he pulls the lanyard attached to the primer which fires the gun.
- Number 5 - Carries the round from the limber to the artillery piece.
- Number 6 - In charge of the ammunition box on the limber and prepares the friction primers.
- Number 7 - Hands the round each time to Number 5.
- Gunner - Aligns and aims the artillery piece.
Battery personnel[change | change source]
- Section commander - A lieutenant commanded a "section" of two guns.
- Battery commander - A captain usually commanded the battery of six guns (four guns in a Confederate battery).
- First Sergeant - Also called an Orderly Sergeant, he helped the battery commander with administrative duties. He was second-in-command to his Captain.
- Quartermaster Sergeant - Was responsible for supply and logistics.
- Artificer - A blacksmith who repaired cannons.
- Farrier - Kept the horses shod.
- Bugler - One or two per battery. A bugler was usually at the battery commander's side and the bugle could be heard over a considerable distance. Artillery bugle calls were nearly identical to cavalry bugle calls.
- Guidon - Carried the battery colors. He was often the most trusted man in the unit.
Notes[change | change source]
- A caisson is a two-wheeled cart used for carrying ammunition and pulling a cannon. It was pulled by a team of six horses and usually had two chests for the ammunition (a limber had one) and a hook for connecting the tail of the gun. Caissons are also used in military and funerals to transport the coffin to the cemetery.
- The Napoleon cannon was developed for the army of Napoleon III. It was not named after Napoleon Bonaparte but rather after his nephew Louis-Napoléon Bonaparte. It was used by the French Army during the Crimean War.
- When Confederates captured Union artillery, they often welded a band around the breech for strength, then rifled the bore. Confederate Napoleon cannons are sometimes mistakenly identified as Parrott guns because of having a welded band on the breech.
References[change | change source]
- "Civil War Cannon". HistoryNet. Retrieved 24 July 2016.
- "Artillery Soldiers". PA Civil War 150. Archived from the original on 1 May 2017. Retrieved 24 July 2016.
- "Limber Chests Including Limbers and Caissons". Civil War Artillery. Retrieved 25 July 2016.
- Catherine Corley Anderson, John F. Kennedy (Minneapolis: Lerner Publications Co., 2005), p. 101
- "Artillery" (PDF). United States Army Ordnance Corps & School. Archived from the original (PDF) on 11 February 2017. Retrieved 24 July 2016.
- "Civil War Cannons". civilwarcannonstech.com. Archived from the original on 15 July 2016. Retrieved 24 July 2016.
- "American Civil War Artillery Organization". American Civil War Homepage. Retrieved 24 July 2016.
- "Model 1857 12-Pounder Napoleon Towed Field Gun (1857)". MilitaryFactory.com. Retrieved 24 July 2016.
- "Civil War Artillery". Civil War Academy. Retrieved 24 July 2016.
- "Civil War Cannon". Civil War Artillery Projectiles. Retrieved 24 July 2016.
- James Morgan. ""Green Ones and Black Ones" The Most Common Field Pieces of the Civil War". Home of the American Civil War. Retrieved 24 July 2016.
- Edward Hagerman, The American Civil War and the Origins of Modern Warfare (Bloomington: Indiana University Press, 1988), p. 22
- "Civil War Artillery". LearnCivilWarHistory.com. Retrieved 25 July 2016.
- "Field Artillery in the Civil War". cwartillery.com. Retrieved 24 July 2016.
- "Civil War Ballooning". Civil War Trust. Retrieved 24 July 2016.[permanent dead link]
- Curt Johnson; Richard Claire Anderson, Artillery Hell: The Employment of Artillery at Antietam (College Station: Texas A & M University Press, 1995), pp. 24–25
- Associated Press (2 May 2008). "Virginia Man Killed In Civil War Cannonball Blast". FOX News Network, LLC. Retrieved 24 July 2016.
- Jack Bell, Civil War Heavy Explosive Ordnance (Denton, TX: University of North Texas Press, 2003), p. 43
- Shane Mountjoy; Tim McNeese, Technology and the Civil War (New York: Chelsea House Publishers, 2009), p. 46
- American Civil War: The Definitive Encyclopedia and Document Collection, ed. Spencer C. Tucker (Santa Barbara, CA ABC-CLIO, LLC, 2013), pp. 89–90
- John McKay, Brave Men in Desperate Times: The Lives of Civil War Soldiers (Guilford, CT: TwoDot, 2007), pp. 41–42
- "Buglers in the Civil War". Taps Bugler. Retrieved 25 July 2016.
- Artillery Bugle Signals Manual. ed. R.J. Samp (Illinois: ACW Buglers Press, 2002), p. 3