Oil well

From Simple English Wikipedia, the free encyclopedia

An oil well is a well to get petroleum from the ground. People in the petroleum industry look for a place that might have oil. They drill a hole deep in the ground and, if the oil is there, then pump it up from the hole. Most oil is very deep underground.

Oil wells can be classified by purpose:

  • Production wells produce gas or oil.
  • Appraisal wells determine the characteristics of a hydrocarbon accumulation.
  • Exploration wells explore for new oil and gas.
  • Wildcat wells explore areas which are not near known gas or oil fields.

Active wells can also be categorized as:

  • Oil producers may produce some gas, but they primarily produce liquid hydrocarbons.
  • Gas producers primarily produce gaseous hydrocarbons and aquifer producers primarily produce water to for the purpose of re-injecting it into the ground to manage the pressure of gas or oil wells.
  • Water injectors inject the water that is removed from the aquifer producers, as well as disposal of any water obtained during gas or oil production.
  • Gas injectors inject gas into reservoirs to maintain the reservoir’s pressure, as well as for disposal and sequestering of gas that cannot be immediately used.

Wells may be straight holes, or directionally drilled:

  • Straight(vertical) holes wells are those drilled to targets essentially beneath the surface location of the well, although some small deviation in the well bore can occur during the drilling process.
  • Directionally drilled wells are those which are drilled to targets not directly beneath the surface location of the well. Directionally drilled wells can be classified further into Straight kick, S- kick and horizontal wells.
    • In straight kick wells, the well bore is deviated until the desired angle is achieved. This angle is maintained all the way to the bottom of the hole.
    • In S-kick wells, the well bore is deviated to achieve the desired horizontal displacement and then returns to a vertical direction before penetrating the producing zone. The term "S-kick" is derived from the shape of the course.
    • Horizontal wells, as the name implies, are deviated until the well bore achieves a horizontal direction. The well bore may then continue in the horizontal direction for hundreds or even thousands of feet, depending on results desired.