The number π (//) is a mathematical constant that is the ratio of a circle's circumference to its diameter. This produces a number, and that number is always the same. However, the number is rather strange. The number starts as 3.141592653589793... and continues without end. Numbers like this are called irrational numbers.
The diameter is the largest chord which can be fitted inside a circle. It passes through the center of the circle. The distance around a circle is known as the circumference. Even though the diameter and circumference are different for different circles, the number pi remains constant: its value never changes. This is because the relationship between the circumference and diameter is always the same.
Fundamentals[change | change source]
Definition[change | change source]
Approximate value[change | change source]
Pi is often written as π, or the Greek letter π as a shortcut. Pi is also an irrational number, meaning it cannot be written as a fraction (), where 'a' and 'b' are integers (whole numbers). This basically means that the digits of pi that are to the right of the decimal go forever—without repeating in a pattern, and that it is impossible to write the exact value of pi as a number. Pi can only be approximated, or measured to a value that is close enough for practical purposes.
A value close to pi is 3.141592653589793238462643... A common fraction approximation of pi is , which yields approximately 3.14285714. This approximation is 0.04% away from the true value of pi. While this approximation is accepted for most of its use in real life, the fraction is more accurate (giving about 3.14159292), and can be used when a value closer to pi is needed. Computers can be used to get better approximations of pi.
History[change | change source]
Mathematicians have known about pi for thousands of years, because they have been working with circles for the same amount of time. Civilizations as old as the Babylonians have been able to approximate pi to many digits, such as the fraction 25/8 and 256/81. Most historians believe that ancient Egyptians had no concept of π, and that the correspondence is a coincidence.
The first written reference to pi dates to 1900 BC. Around 1650 BC, the Egyptian Ahmes gave a value in the Rhind Papyrus. The Babylonians were able to find that the value of pi was slightly greater than 3, by simply making a big circle and then sticking a piece of rope onto the circumference and the diameter, taking note of their distances, and then dividing the circumference by the diameter.
Knowledge of the number pi passed back into Europe and into the hands of the Hebrews, who made the number important in a section of the Bible called the Old Testament. After this, the most common way of trying to find pi was to draw a shape of many sides inside any circle, and use the area of the shape to find pi. The Greek philosopher Archimedes, for example, used a polygon shape that had 96 sides in order to find the value of pi, but the Chinese in 500 CE were able to use a polygon with 16,384 sides to find the value of pi. The Greeks, like Anaxagoras of Clazomenae, were also busy with finding out other properties of the circle, such as how to make squares of circles and squaring the number pi. Since then, many people have been trying to find out more and more exact values of pi.
|Claudius Ptolemy||around 150 CE||3.1416|
|Zu Chongzhi||430-501 CE||3.1415929203|
|al-Khwarizmi||around 800 CE||3.1416|
|Van Ceulen||around 1600||3.14159265358979323846264338327950288|
In the 16th century, better and better ways of finding pi became available, such as the complicated formula that the French lawyer François Viète developed. The first use of the Greek symbol "π" was in an essay written in 1706 by William Jones.
A mathematician named Lambert also showed in 1761 that the number pi was irrational; that is, it cannot be written as a fraction by normal standards. Another mathematician named Lindeman was also able to show in 1882 that pi was part of the group of numbers known as transcendentals, which are numbers that cannot be the solution to a polynomial equation.
Pi can also be used for figuring out many other things beside circles. The properties of pi have allowed it to be used in many other areas of math besides geometry, the study of shapes. Some of these areas are complex analysis, trigonometry, and series.
Pi in real life[change | change source]
Today, there are different ways to calculate many digits of π. This is of limited use though.
Pi can sometimes be used to work out the area or the circumference of any circle. To find the circumference of a circle, use the formula C (circumference) = π × (diameter). To find the area of a circle, use the formula π (radius²). This formula is sometimes written as , where r is the variable for the radius of any circle and A is the variable for the area of that circle.
To calculate the circumference of a circle with an error of 1 mm:
- 4 digits are needed for a radius of 30 meters
- 10 digits for a radius equal to that of the earth
- 15 digits for a radius equal to the distance from the earth to the sun.
- 20 digits for a radius equal to the ddistance from the earth to Polatis.
See also[change | change source]
References[change | change source]
- "Compendium of Mathematical Symbols". Math Vault. 2020-03-01. Retrieved 2020-08-10.
- "Pi". www.mathsisfun.com. Retrieved 2020-08-10.
- Weisstein, Eric W. "Pi". mathworld.wolfram.com. Retrieved 2020-08-10.
- Berggren, Lennart; Borwein, Jonathan M.; Borwein, Peter B. (2000). Pi, a Sourcebook. Springer Verlag. ISBN 978-0-387-98946-4.
- Arndt, Jörg; Haenel, Christoph (2006), Pi Unleashed, Springer-Verlag, ISBN 978-3-540-66572-4, English translation by Catriona and David Lischka
- Goodwin College of Professional Studies. (1994–2010). "About Pi". Retrieved 2010-06-05. CS1 maint: discouraged parameter (link) CS1 maint: date format (link)
- "How Many Decimals of Pi Do We Really Need?". jpl.nasa.gov. Retrieved February 19, 2018.
- "Pi to 4 Million Decimals". Archived from the original (php) on 2008-03-09. Retrieved 2010-06-05. CS1 maint: discouraged parameter (link)
- Cajori, Florian (2007). A History of Mathematical Notations: Vol. II. Cosimo, Inc. pp. 8–13. ISBN 978-1-60206-714-1.
the ratio of the length of a circle to its diameter was represented in the fractional form by the use of two letters ... J.A. Segner ... in 1767, he represented 3.14159... by δ:π, as did Oughtred more than a century earlier
- Herbert, Tom (2019-03-14). "A Google employee has smashed the Pi world record... on Pi Day". standard.co.uk. London: Evening Standard. Retrieved 2019-03-14.
- Bailey-Millado, Rob (2019-03-14). "Pi world record calculation broken by Google employee Emma Haruka Iwao". nypost.com. New York Post. Retrieved 2019-03-14.
- Anon (2019). "Most accurate value of pi". guinnessworldrecords.com. Guinness World Records. Retrieved 2019-03-14.
- Shaban, Hamza (2019). "Pi Day news: Google employee breaks record, calculates 31.4 trillion digits of Pi". chicagotribune.com. Chicago Tribune. Retrieved 2019-03-14.
- Arndt, Jorg; Haenel, Christoph (2001). Pi - Unleashed. Springer Science & Business Media. ISBN 978-3-540-66572-4.
- Beckmann, Petr 1971. A History of Pi. St. Martins Press, London.
- J.J. O'Connor; E.F. Robertson (August 2001). "Pi History". Retrieved 2010-06-05. CS1 maint: discouraged parameter (link)
- "PI". 2000–2005. Retrieved 2010-06-06. CS1 maint: discouraged parameter (link) CS1 maint: date format (link)