Jump to content

Frame (vehicle)

From Simple English Wikipedia, the free encyclopedia
(Redirected from Unibody)
A Land Rover ladder type frame

A vehicle frame, is the main structural element of a motor vehicle. All other components are connected to the frame. Another term for this design is body-on-frame construction.[1] A vehicle's frame is part of the chassis.[2]

The first motor vehicles were almost all built on a frame.[3] Since then, nearly all cars have changed to unibody construction (see below). The last UK mass-produced car with a chassis was the Triumph Herald, which was discontinued in 1971. By contrast, today nearly all trucks and buses still use chassis frames.

Types[change | change source]

Ladder Frame[change | change source]

Named because it resembles a ladder, the ladder frame is the simplest and oldest of all designs. It has two rails, or beams, and crossmembers connecting them. Most manufacturers stopped using them on cars around the 1940s. They are now seen mainly on trucks.

Unibody[change | change source]

In a unibody (also unit body) design, the sheet metal of the body is also the frame.[4] It may use subframes in certain areas.[4] Unibody designs first appeared in the 1930s on some Citroën automobiles. Many modern vehicles use unibody construction including cars, minivans and crossovers. A few SUVs use unibody construction. An example is the Dodge Durango.

References[change | change source]

  1. Mark Gustavson, Custom Car: Modeling (Waukesha, WI: Kalmbach Publishing Co., 1999), p. 7
  2. Tim Gilles, Automotive Chassis: Brakes, Suspension, and Steering (Clifton Park, NY: Thomson Delmar Learning, 2005), p. 317
  3. Hugh Dolner, 'Considerations of Motor Car Elements', Cycle and Automobile Trade Journal, Philadelphia (1 April 1906), p. 78
  4. 4.0 4.1 CDX Automotive, Fundamentals of Automotive Technology: Principles and Practice (Burlington, MA: Jones & Bartlett Learning, 2014), p. 971