The mobile phone can be used to communicate over long distances without wires. It works by communicating with a nearby base station (also called a "cell site") which connects it to the main phone network. As the mobile phone moves around, if the mobile phone gets too far away from the cell it is connected to, that cell sends a message to another cell to tell the new cell to take over the call. This is called a "hand off," and the call continues with the new cell the phone is connected to. The hand-off is done so well and carefully that the user will usually never even know that the call was transferred to another cell.
As mobile phones became more popular, they began to cost less money, and more people could afford them. Monthly plans became available for rates as low as US$30 or US$40 a month. Cell phones have become so cheap to own that they have mostly replaced pay phones and phone booths except for urban areas with many people.
Many mobile phones are "smartphones". As well as making voice calls, they can be used as computers.
History[change | edit source]
Mobile phones in the 1950s through 1970s were large and heavy, and most were built into cars. In the late 20th century technology improved so people could carry their phones easily.
Although Dr. Martin Cooper from Motorola made the first call using a mobile phone in 1973, it did not use the type of cellular mobile phone network that we use today.
The first mobile phone networks were created in the late 1970s in Japan. Now almost all urban areas, and many country areas, are covered by mobile phone networks.
Technology[change | edit source]
There are two types of cell telephone networks:
- Analogue networks
- Digital networks
Most of the older cell phones used analog networks. All modern phones use digital networks.
Digital networks are also known as second generation, or 2G, technologies. They differ either by technology or by speed. The most used digital network is GSM (Global System for Mobile communication). It is used mainly in Europe and Asia, while CDMA (Code-Division Multiple Access) networks are mainly used in North America. Other countries like Japan have different 2G technologies.
The radio waves that the mobile phone networks use are split into different frequencies. The frequency is measured in Hz. Low frequencies can send the signal farther. Higher frequencies provide better connections and the voice communications are generally clearer. Four main frequencies are used around the world: 850, 900, 1800 and 1900 MHz. Europe uses 900 and 1800 MHz and North America uses 850 and 1900 MHz.
Today there are mobile phones that work on two, three or four frequencies. The most advanced phones work on all frequencies. They are called 'world' phones and can be used everywhere.
Shapes[change | edit source]
There are different kinds of phones. A flip phone flips open, and is best for calling. A bar phone is shaped like a candy bar, and the keys and screen are on one face. A slate phone is a phone that has almost no buttons, and uses a touchscreen. Most smartphones are slates. A slider phone slides on rails. It can slide out number keys or a mini keyboard, but some do both. A swivel spins on an axle.
How mobile phones work[change | edit source]
When a mobile phone is switched on, it finds and connects to a nearby mobile phone base station. Computers in the base station check if the phone is allowed to use the network. The base station covers what is called a cell and a phone can move between different cells, but will only ever communicate with one cell at a time. This is why mobile communications are sometimes called cellular communications.
Once connected to a cell, the mobile phone can make calls. Because the network knows that the phone is connected to that particular cell, it can also route calls to the mobile phone. Sometimes the radio connection to the cell is lost, for example when you go underground. This means the phone cannot make or receive calls until the connection is made again.
Networks and payment[change | edit source]
The network is the company that provides the phone service. In most areas there will be more than one mobile network. Customers choose networks based on how well the different networks work in their area, or by price.
There are two main ways to pay for mobile phone calls:
- If you pay by contract you will pay the network money every month so that you can make calls. Usually you can talk for a lot of time for the monthly fee, but if you do not use the phone a lot you still pay the same money.
- Pay as you use
- If you pay as you use, you will pay for a fixed amount of call time credit which you then use up when phoning people. Once the credit is used up you must buy some more to use the phone. This can be cheaper if you do not use the phone a lot.
Some digital mobile phones need a separate microchip, called a Subscriber Identity Module or SIM, to work. The SIM has information like the phone number and payment account and this is needed to make or receive calls. The SIM may be supplied by the same company as the phone, or a different one. Sometimes you can change the network by using a SIM from another network, but some companies do not want this to happen and they lock the phone so that you have to use their SIM. This type of phone uses GSM signals.
The others have a special radio inside them that only makes phone calls when the phone is activated. When someone buys a contract, the network gives them a code, that if they enter it into the phone, the phone will then make calls. It is almost always impossible to switch to a different network's code on this type of phone. This type of phone is called CDMA.
Smartphones[change | edit source]
Many 21st century mobile phones are smartphones. These phones can be used for email, browsing the internet, playing music and games, and many other functions that computers can perform. This is because they basically are small computers. Older phones also used computer technology, but lacked many of the parts of a computer that were too big to fit into a phone. Modern phone makers have been able to use smaller parts. Most smartphones are also GPS receivers and digital cameras.
Data communication has also become faster. Smart phones can send and receive data much faster than older phones. The industry uses different standards to label the data transmission rates. 2G was introduced in 1991. 2G means 2nd Generation. 2G phones transmit data at about the same speed as a 56kbit/s (kilobits per second) dial-up modem would get. 3G was introduced in 2002. Depending on where they are, 3G phones vary in speed between about 200kbit/s to 14Mbit/s (megabits per second). This is comparable to a DSL or low end cable modem speed. Most smart phones use 3G technology to make them fast enough to practically use internet and other data features. Faster 4G neworks operate in many places, with speeds estimated as fast as 100Mbit/s to 1Gbit/s (gigabit per second). This would be as fast as some computer networks that use ethernet. Many smart phones introduced after 2010 use 4G technology.
- Sending and receiving emails, text, photographs and multimedia messages
- Registering contacts
- calculator, currency, alarm, etc. functions
- Playing games
References[change | edit source]
- Ulyseas, Mark (2008-01-18). "Of Cigarettes and Cellphones". The Bali Times. http://www.thebalitimes.com/2008/01/18/of-cigarettes-and-cellphones/. Retrieved 2008-02-24.